12v Lithium-Ion 3-Piece Combo Kit With 65 Accessories

MODEL #: GL12DHOK2

  • Lithium-Ion Battery Technology Makes These Tools Lightweight and Compact, with Twice The Run Time Of Nicad, and Up to 18 Months Storage Time On A Charge
  • 3/8” VSR Drill with Single Sleeve Chuck and Two Speed Ranges
  • Multi-Purpose Oscillating Tool for Flush and Plunge Cutting, Sanding, Grout Removal, and More
  • Close-Quarter Hammer Drives Nails Automatically
FeaturesSpecificationsOperator’s ManualFAQ
12V Drill/Driver (GLCD12)

  • 3/8” Single-sleeve keyless chuck for one-handed bit changes
  • Two variable speed ranges (0-350/0-1,300 RPM) for versatility
  • Die-cast gear housing for durability
  • 12 Torque/clutch settings
  • Electric brake
  • Built-in LED light

12V Close-Quarter Hammer (GLAH12)

  • Drives nails automatically – very handy in corners or tight spots
  • No swinging a hammer, no smashed fingers, no mis-hits
  • Magnetic Sleeve holds nails in place and guarantees a flush finish
  • Built-In LED Light
  • Handles up to 3-1/2” common and finish nails

12V Multi-Purpose Oscillating Tool (GLMT12)

  • The most useful and versatile tool in the toolbox
  • A detail sander, flush and plunge cut saw, drywall cut-out tool, power scraper, grout removal tool, and more
  • Die cast aluminum gear housing for durability
  • 4-Pin flange design holds accessories firmly in place
  • Universal accessory adaptor included

Includes: Two 12V Lithium-Ion Batteries, 75 Minute Charger, 44-Piece Drill/Driver Bit Set with Stor¬age Box, 3” Delta Sanding Pad, 12 Assorted Sanding Triangles, 10mm, 20mm, and 30mm Flush Cut Blades, 3” HSS Segmented Blade, Rigid Scraper Blade, Accessory Adaptor, Storage Box and Heavy-Duty Wide-Mouth Contractor’s Bag.

  • Motor Input: 12V DC
  • Charger input: 120V AC, 60Hz
  • Charger output: 13.6V DC, 1 Amp
  • Recharging Time: 75 Minutes
  • Battery Type: Lithium-Ion
  • Battery Capacity: 1300 mAh

Drill/Driver (GLCD12)

  • No Load Speed: 0-350/ 0-1,300 RPM, Reversible.
  • Chuck: 3/8” (10mm) Single Sleeve Keyless
  • Torque Setting: 12

Close-Quarter Hammer: (GLAH12)

  • No Load Speed: 3,000 BPM
  • Capacity: common or finish nail Up to 3-1/2” (88mm) length.

Multi-Purpose Oscillating Tool (GLMT12)

  • No Load Speed: 20,000 OPM
  • Recommended Accessories: GAMT301-GAMT308

Operator’s manual – 12V Close-Quarter Hammer
Operator’s manual – 12V Lithium-ion Drill/Driver
Operator’s manual – Multi-Purpose Oscillating Tool

Coming Soon.





Share